Number the choices below to reflect the correct sequence for using a fire extinguisher:
A- Aim at the base of the fire.
B- Squeeze the handle.
C- Sweep back and forth.
D- Pull the pin.
Correct Response: D, A, B, C
The correct sequence of action for using a fire extinguished is easily remembered by keeping the PASS acronym in mind.
P is pulling out the pin to activate the fire extinguisher; A is to aim the fire extinguisher at the base of the fire; S is to squeeze the handle to discharge the contents of the fire extinguisher; and S is sweep back and forth over the base of the fire while discharging the contents.
Instructions to be followed when a fire occurs:
The following steps should be followed when a fire occurs from the primary stage:
- Launch fire alarms and contact the fire department.
- Define a safe evacuation path, and make sure that the fire does not reach this path.
- Choosing the right type of extinguishers to extinguish the fire.
- Stay away from fire as it may erupt again.
- Evacuation of the place in case the fire extinguisher is empty, and standing in another safe place.
Steps to use a fire extinguisher:
PASS is used to extinguish the fire using a fire extinguisher. This technique is the first letter of the steps to be taken to operate the fire extinguisher. The steps are:
- Pull pin: start Pull the pin located at the top of the fire extinguisher to break the lock, and then make sure that the extinguisher working by testing to see the extent of the current spread.
- Aim: Stand in a safe place, at a safe distance from the fire, and correct the outlet or the opening of the extinguisher towards the fire base.
- Squeeze: Press the knobs together to remove the fire extinguisher contents.
- Sweep: Move the extinguisher's nozzle from side to side as you approach the fire, making sure to point it towards the base of the fire specifically.
Fire extinguishing types of fire:
Electrical Fire:
The small electrical fires are extinguished by identifying the device that got the fire as a result of it and shut it off, after which the fire is strangled using a extinguisher or blanket, and avoiding the use of water, because it leads to electric shocks.
Cooking fires:
Cooking fires resulting from the use of the oven or stove are extinguished by closing the oven or stove, stifling the fire with a B fire extinguisher, placing a lid on burnt food, and avoiding use of water or fan;
Gas fires:
Fire from gas supply is extinguished by following the following steps:
- Closure of gas supplies.
- Stifle the fire using a blanket, fire extinguisher type B, or cold water.
- Ventilation of the area to get rid of gas, and call the experts to examine the gas pipes so that no explosion occurs.
Note:
Be careful not to light the cigarette or light the lights if there is a smell of gas; because the smallest spark may ignite a flame and an explosion.
A- Aim at the base of the fire.
B- Squeeze the handle.
C- Sweep back and forth.
D- Pull the pin.
Correct Response: D, A, B, C
The correct sequence of action for using a fire extinguished is easily remembered by keeping the PASS acronym in mind.
P is pulling out the pin to activate the fire extinguisher; A is to aim the fire extinguisher at the base of the fire; S is to squeeze the handle to discharge the contents of the fire extinguisher; and S is sweep back and forth over the base of the fire while discharging the contents.
Instructions to be followed when a fire occurs:
The following steps should be followed when a fire occurs from the primary stage:
- Launch fire alarms and contact the fire department.
- Define a safe evacuation path, and make sure that the fire does not reach this path.
- Choosing the right type of extinguishers to extinguish the fire.
- Stay away from fire as it may erupt again.
- Evacuation of the place in case the fire extinguisher is empty, and standing in another safe place.
Steps to use a fire extinguisher:
PASS is used to extinguish the fire using a fire extinguisher. This technique is the first letter of the steps to be taken to operate the fire extinguisher. The steps are:
- Pull pin: start Pull the pin located at the top of the fire extinguisher to break the lock, and then make sure that the extinguisher working by testing to see the extent of the current spread.
- Aim: Stand in a safe place, at a safe distance from the fire, and correct the outlet or the opening of the extinguisher towards the fire base.
- Squeeze: Press the knobs together to remove the fire extinguisher contents.
- Sweep: Move the extinguisher's nozzle from side to side as you approach the fire, making sure to point it towards the base of the fire specifically.
Fire extinguishing types of fire:
Electrical Fire:
The small electrical fires are extinguished by identifying the device that got the fire as a result of it and shut it off, after which the fire is strangled using a extinguisher or blanket, and avoiding the use of water, because it leads to electric shocks.
Cooking fires:
Cooking fires resulting from the use of the oven or stove are extinguished by closing the oven or stove, stifling the fire with a B fire extinguisher, placing a lid on burnt food, and avoiding use of water or fan;
Gas fires:
Fire from gas supply is extinguished by following the following steps:
- Closure of gas supplies.
- Stifle the fire using a blanket, fire extinguisher type B, or cold water.
- Ventilation of the area to get rid of gas, and call the experts to examine the gas pipes so that no explosion occurs.
Note:
Be careful not to light the cigarette or light the lights if there is a smell of gas; because the smallest spark may ignite a flame and an explosion.
Labels
Nursing questions